Intel Processor Serial Number Control Utility; System Requirements - NEC POWERMATE 2000 Service And Reference Manual

7. At the completion of the restore, a Restore Complete screen is displayed,
with a prompt to either do system updates (see step 8) or reboot the system
(see step 9).
8. If updating the system, do the following procedure at the system update
prompt.
!
Remove the Master Restore bootable diskette and restore CD from their
drives.
!
Insert the NEC Application and Driver CD or other CD into the drive(s).
If using the NEC Application and Driver CD, go to "NEC Application
and Driver CD" earlier in this section to complete the update.
9. If you are not updating the system, remove the Master Restore bootable
diskette and restore CD-ROM disc from their drives. Press any key to reboot
the system and open the Windows desktop.

Intel Processor Serial Number Control Utility

The Intel Processor Serial Number Control Utility is a Windows program that
enables or disables the reading of the Pentium III processor serial number by
software. This function controls which software programs or websites have
permission to read the processor serial number. When installed, the utility runs
automatically each time the system powers on.
This utility places an icon in the Windows system tray. The icon provides a
visual status of the processor serial number. You have the option of hiding the
system tray icon. You can enable or disable the processor serial number at any
time. However, enabling the serial number requires restarting the system.
The following information describes:
!

system requirements

!
installation procedures
!
processor serial number features
!
FAQs
!
technical support.
System Requirements
The Intel Processor Serial Number Control Utility requires:
!
a Pentium III processor-based system
!
Windows 98, Windows NT 4.0 (or later), or Windows 2000
!
2 megabytes of hard drive space.
System Configuration 2-27