Honeywell VISTA-128BPT Programming Manual page 70

VISTA-128BPT/128BPT-SIA/250BPT PROGRAMMING GUIDE
Z o n e L i s t P r o g r a m m i
Z o n e L i s t P r o g r a m m
After all relays have been programmed, upon entering 00 at the "ENTER RELAY NO." prompt, you are asked to enter a zone
list. If a zone list number was used to start or stop a relay, you must define the zones belonging to that list as follows:
PROMPT
ENTER Zn LIST ?
00=QUIT 00
01 ADD ZONE #
000=QUIT 000
01 Del Zn LIST ?
1=YES 0=NO 0
01 DEL ZONES ?
1=YES 0=NO 0
01 Zn to DELETE ?
000=QUIT 000
VIEW Zn LIST ?
00=QUIT 00
01 ASSIGNED ZONE
000=QUIT 000
n g
i n g
EXPLANATION
Enter the zone list number 01-15. Enter 00 to quit.
Using 3-digit entries, enter each zone to be included in this zone list. Press [∗] after you enter each zone
number.
When you have entered all desired zones, enter 000.
Press [∗] to continue.
Enter 0 to save this zone list.
Enter 1 to delete it. (000 in the first entry erases all zones in the list once saved when pressing [∗].
Enter 1 to delete one or more zones in that zone list. Enter 0 if no changes are necessary. If you enter 1,
the following screen appears; otherwise, the "Enter Zone LIST" prompt reappears.
Enter each zone number to be deleted from the zone list, pressing [∗] after each number.
This display appears if you pressed 00 at the "Enter Zone LIST" prompt. Enter the zone list number that
you wish to view.
Press [∗] to continue.
Press [∗] to scroll through all zones in that list. Enter 000 + [∗] to quit.
Press 1 to exit Menu Mode.
Press ∗99 to exit Program Mode.
66