Configuration Commands
wan
wan
Cisco RV34xx Router CLI Reference Guide
router06000a>vpn delete --name vpn1
vpn show
To show the vpn service, use the vpn show command.
Parameter
vpn show - Enter vpn show.
Default Configuration
None.
Example
The following example displays the vpn show command.
router06000a>vpn show
The wan commands enable you to configure the wan interfaces for the router
within the command line. All the wan commands are listed here:
•
wan {add | edit} interface atm portid.vpi.vci --linktype {eoa | pppoa | ipoa} -
-encap {llc | vcmux} --atmcat {ubr | cbr pcr | nrt vbr pcr scr mbs | rtvbr pcr scr
mbs}
•
wan delete interface atm portid.vpi.vci
•
wan {add | edit} service atm portid.vpi.vci --protocol {bridge | ipoe | pppoe |
ipoa | pppoa}
•
wan {add | edit} service ptm --protocol {bridge | ipoe | pppoe}
•
wan {add | edit} service eth --protocol {dhcp | static | pppoe | l2tp | pptp}
•
wan delete service atm portid.vpi.vci --vlan
•
wan delete service ptm --vlan vlanID
•
wlan delete service eth --vlan vlanID
vlanID
4
37