Dhcpserver Show Vlanx; Lan; Lan Config --Ipaddr Bridge-Name Primary Ip-Address Subnet-Mask - Cisco RV132W Command Line Interface Reference Manual

Configuration Commands

lan

lan
Cisco RV34xx Router CLI Reference Guide
dhcpserver show vlan
Use the dhcpserver show vlan
Parameters
dhcpserver show vlan
Default Configuration
None.
Example
The following example displays the dhcpserver VLAN ID.
router06000a>dhcpserver show vlan1
The lan command is used to configure the IP layer data for the primary LAN
interfaces. All the lan commands are listed here:
• lan config --ipaddr
• lan config --dhcpserver
• lan config --dhcpclient
• lan show bridge-name
lan config --ipaddr
mask
To manage the IP address of the LAN, use the lan config --ipaddr bridge-name
primary IP address subnet mask command.
Parameters
bridge-name - Enter the bridge name of the IP address
IP-address subnet-mask - Enter the primary IP address and subnet mask.
X
X
to show the vlan connection to the dhcp server.
X
- Enter the VLAN ID
bridge-name
primary IP
bridge-name
bridge-name
bridge-name
-address subnet-mask
{enable | disable}
{enable | disable}
-address subnet-
primary IP
4
24