Cisco GS7000 Installation And Operation Manual page 142

Appendix B
Enhanced Digital Return Multiplexing Applications
http://www.cisco.com/en/US/tech/tk482/tk876/technologies_white_paper09186a
0080254eba.shtml
To Connect the EDR LCM for Status Monitoring
The LCM module is equipped with the interface ribbon cable. The cable can be used
to connect the LCM module and the Status Monitor point of the desired EDR
transmitter module for local status monitoring.
Note: Local Status monitoring supports one EDR transmitter module at a time.
The following diagrams show how to connect the interface ribbon cable.
Note: Insert the cable head-end with the red marker on back.
When EDR 1:1 transmitter module is installed:
When EDR 2:1 transmitter module is installed:
124