Makita BPT350 Technical Information page 7

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -6. Spring section (cont.)
ASSEMBLE
1) Take the reverse steps of the disassembling procedure for Spring section. Refer to Page 6.
2) Secure Spur gear 55 complete with Flat washer 4 and 3x16 Tapping screw bind PT. Adjust the position of Roller of
Spur gear 55 complete so that it comes to under the hook portion of hammer when installing spring section in Housing
L. (Fig. 24)
3) Secure spring section with 3x16 Tapping screw bind PT. (Fig. 25)
4) After assembling housing R, mount driver guide, driver, and driver guide cover. Refer to Page 3.
Fig. 24
Tapping Screw bind PT 3x16 Spring section
Flat washer 4
Roller portion of
Spur gear 55
Hook portion of
Hammer
Fig. 25
Hook portion
of Hammer
Roller
(The position
is lower than
that of the hook
portion of hammer)
P 7 / 13
Spring section
Tapping screw
bind PT 3x16