Fig - Makita BPT350 Technical Information

W
iring diagram
Fig. D-5
Guide Lead wire (red) of Start point
regulator to DC motor while passing it
between boss A and lead wire holder A.
Fix lead wire (black) of ON-OFF switch
with lead wire holder A.
Pass the following lead wires
between rib and inner wall of Housing L.
*Lead wire (orange) for connecting
ON-OFF switch with terminal
*Lead wire (orange) for connecting
Switch for LED circuit with Terminal
*Lead wire (red) for connecting
LED circuit with Switch for LED circuit
*Lead wire (red) for connecting
Start point regulator and DC motor
See Fig. D-6.
Terminal
See Fig. D-7.
Fig. D-6
Lead wire holder B
Lead wire (red) of
Start point regulator
Put lead wire (red) of Start point regulator
on LED lead wire (red). Pass these lead
wires (red) between lead wire holder B and
the wall of Housing L.
Boss A
Lead wire (red)
to + Terminal of
DC Motor
Lead wire
holder A
LED Circuit
LED lead wire (red)
Wall of Housing L
Start point regulator
Lead wire (black) for connecting
ON-OFF Switch and Start point regulator
Lead wire Main switch (ON-OFF Switch)
holder A put on Start Point Regulator
Light switch Arm
Switch for LED Circuit
Rib
Lead Wire Holder B
DC Motor
Fig. D-7
to Terminal
Lead wires (red and black) of LED circuit pass
between rib A and rib B so as not to put them
on the LED circuit.
P 13 / 13
ON-OFF
Switch
See Fig. D-5.
to Switch for
LED Circuit
Rib B
Rib A
LED Circuit