General Adjustments/Settings; Set-Up Adjustments - Philips bClever SV1 User Manual

General
adjustments/settings
MENU MENU OK OK
BRIGHTNESS
VOLUME + VOLUME +
PICTURE FORMAT
DATA
KEY LOCK
PICTURE SIZE – PICTURE SIZE – PICTURE SIZE + PICTURE SIZE +
MENU
VOLUME – VOLUME –
DATA S-VIDEO VIDEO
STANDBY
SOURCE AV MUTE
SOURCE
Philips Multimedia Projector
5. Operation
Set up adjustments
The projector is equipped with the following functions to optimize its use and handling:
Press Menu and select 'Set up' in the menu bar.The following settings/adjustments can now
•
STAND BY
be made for both Data, Component and Video/S-video input, following the instructions
PICTURE SIZE
CONTRAST FREEZE
COLOUR TRACKING ZOOM
under 'General explanation' and the screen:
S-VIDEO VIDEO
AV MUTE INFO
– Language
OK
to select the required menu language;
KEYSTONE
– Picture size
MUTE
to reduce/enlarge the size of the projected picture;
– Keystone
to correct picture distortion of the vertical keystone type by internal scaling.
– Monitor out
enables image on second monitor connected;
– Mirror
to mirror the picture for use of the projector in various positions with respect to the
user(s) and the projection screen;
– Auto Component Selection
to select between YPbPr and RGBsog as component input source;
– SmartSave
to switch off SmartSave mode or select the delay time after which the projector
automatically switches to Standby.
– Feedback
to suppress OSD feedback messages. Warning or error messages however are never
suppressed;
– Lamp counter
to show the operating time of the lamp, which can be reset after a new lamp has been
installed;
– System information
the System Information sub menu contains an overview of the most relevant projector
information, including information on the hardware and software configuration;
– Factory settings
to reset all user settings to the default factory settings;
28
On Screen Display Menu >
English User guide bClever SV1