Removing and attaching the top casing cover
You need to remove the top casing cover if you want to remove or install the following components:
•
Memory modules
Removing the bottom casing cover
► Turn the device over.
► If you are using a locking bracket and a padlock to protect the device, remove the lock
and open the locking bracket (see
or
► If you are using a locking bracket and a Kensington Lock cable to protect the device,
remove the Kensington Lock cable and open the locking bracket (see
Security Lock", Page 51
► Push the release on the rear side of the device in the direction of the arrow (1) while at the
same time sliding the bottom casing cover in the direction of the arrow (2).
► Lift the bottom casing cover off the device (3).
Fujitsu
"Using a locking bracket", Page
and
"Using a locking bracket", Page
3
2
System expansions
52).
"Using the
52).
1
87