Connecting External Devices; Ports On The Device - Fujitsu ESPRIMO Q55x Operating Manual

Getting started

Connecting external devices

Read the documentation on the external device before connecting it.
With the exception of USB devices, always remove all power plugs
before connecting external devices!
Do not connect or disconnect cables during a thunderstorm.
Always take hold of the actual plug. Never unplug a cable by pulling the cable itself.

Ports on the device

Device Ports Externaldevices
The ports are located on the front and rear side of the device. The ports available on
your device depend on the configuration level you have selected. The standard ports are
marked with the symbols shown below (or similar). Detailed information on the location
of the ports is provided in the manual for the mainboard.
DVI-D monitor port, white
Monitorport
Serial interface
Serialinterface
USB 2.0 - Universal Serial
Bus, black
UniversalSerialBus
USB 3.0 - Universal Serial
Bus, blue
—
PS/2 port
Some of the connected devices require special software (e.g. drivers) (refer to the
documentation for the connected device and operating system).
34
DP DisplayPort
LAN port
LANport
Audio input (Line in)
Audio output (Line Out), light green
Lineout Audiooutput
Fujitsu