Removing The Optical Drive - Fujitsu ESPRIMO Q55x Operating Manual

System expansions

Removing the optical drive

• The top casing cover has been removed (see
Removing the drive
Ensure that you do not pull strongly on attached leads.
2
► Press and hold the unlocking mechanism (a) and carefully slide the optical drive slightly in the
direction of the arrow (1) until the drive and casing contacts and leads are accessible.
► Detach the leads from the drive (2).
► Lift the drive out of the drive bay (3).
► Remove the drive cage (see
► Detach the plug for the drive leads from the drive cage by pulling it through the opening.
► Detach the drive leads from the mainboard (see graphic on slots in Section
of the drive bays and drives in your device", Page
► Reinstall the drive cage (see
care that no cables or leads become trapped.
72
1
2
"Removing the drive cage", Page
"Installing the drive cage", Page
"Removing the top casing cover", Page
a
67).
62).
68). Take
65).
3
"Overview
Fujitsu