Parts And Their Functions; Front Panel - Panasonic AK-HCU3550EA Operating Instructions Manual

1. Parts and their functions

w Front panel
Power switch [POWER]
This is the unit's power switch.
Move it to the ON position when turning on the power.
It functions as a circuit breaker to protect the unit from
overcurrents.
When this function is tripped, the switch is set to the OFF
position.
Power indicator [POWER ON]
This lights when the power switch
power is supplied to the unit.
Camera cable open alarm indicator
[ALARM OPEN]
This lights when the unit and camera are not connected
by the optical fibre multi cable.
POWER ALARM
OPEN SHORT
OFF ON
TALLY/CALL
is set to ON and

MIC PGM INCOM
ON PGM1
FAN
OFF OFF
PTT PGM2
INCOM PGM
SYS PRIV
LEVEL
Camera Control Unit AK-HCU3550
 

FUSE
CAMERA
250V 2A
Inside the front panel
Camera cable short-circuit alarm indicator
[ALARM SHORT]
This lights when the cable connecting the unit and
camera has been short-circuited.
Fan alarm indicator [ALARM FAN]
This lights when the unit's cooling fan stops running.
Tally indicator/CALL switch [TALLY/CALL]
This functions both as the CALL switch, which is pressed
when calling the camera side, and the tally indicator.
The indicator remains lit when tally signals (R) are input.
While the CALL switch is pressed on the camera, ROP,
MSU or CCU, it lights up when no tally signals are input,
and it goes off when tally signals are input.
7
PUSH

 
MENU SEL/SET
ON
OFF