Device Control Block (Mks-8036A Search Dial Module, Option) - Sony DVS-9000 System User Manual

Device Control Block (MKS-8036A Search Dial Module,
Option)
Using the device control block (MKS-
8036A search dial module
can directly operate an XDCAM, disk
recorder, VTR or other external device,
frame memory clip, or shotbox. The device
4 DELAY button
2 Device selection buttons
a Timecode display
This shows the current time (CURRENT)
and the start and stop point timecode values
for the current reference device (START
TC, STOP TC). When you press a device
selection button, the button lights, selecting
the assigned device as the reference device,
and displaying its setting value.
In the case of the [SBOX] buttons, the
display does not change. The displayed
72
Names and Functions of Parts of the Control Panel
1)
, option), you
1 Timecode display
CURRENT
START TC
STOP TC
DEV DEV DEV DEV DEV
1 2 3 4 5
FM1 FM2 SBOX SBOX
DELAY
CLIP CLIP 1 2
SET SET
START STOP SET
START STOP
TC TC DUR
TC TC
ALL
CUE REW PLAY FF
STOP
5 Editing
buttons
control block (MKS-8031TB track ball
module, option) can be used together.
1) The product name of the MKS-8036A is "device
control module," but in this manual it is referred to
as "search dial module" to distinguish it from the
MKS-8031TB trackball module.
7 TIMELINE button
8 STOP button
6 External device
TIME
SHTL JOG VAR
LINE
STOP
DEV
6
SBOX
3
STB
OFF
REC
9 Search dial
3 SBOX buttons
setting value depends on whether the
[TIMELINE] button is on or off, as follows.
When the [TIMELINE] button is on:
Displays the start and stop points of the
last set keyframe on the timeline. When
the keyframe number is changed and
the last register and keyframe change,
the display also changes. (timeline
setting mode)
operation buttons
ENBL