Sony DVS-9000 System User Manual page 1016

Coupling external boxes
By coupling a number of external boxes, the number of inputs can be increased.
Here the example of coupling External Box1 and External Box2 is described.
1
2
3
4
5
6
Setting the group number of an S-Bus description name
1
2
1016
Router Interface Settings (Router Menu)
a) When Matrix Size is 8×1
b) When Matrix Size is 16×1
c) When Matrix Size is 32×1
In the Router/Tally >Router >External Box Assign menu, select [External
box1] from the <Device> group.
In the <Matrix Size> group, select [8×1].
Turn the knobs to make adjustments.
Knob Parameter Adjustment
1 Source Source start address
2 Destination Destination start address
3 Level Level
In the <Device> group, select [External box2].
In the <Matrix Size> group, select [32×1].
Turn the knobs to make adjustments.
At this point make the settings of Destination and Level the same as in step
3.
This automatically couples External Box1 and External Box2, forming an
external box with 40 (8+32) inputs.
In the <Alias Name Gp> group of the Router/Tally >Router menu, press
[Gp No].
Turn the knob to set the following parameter.
Knob Parameter
1 Gp No
a) When setting values 1 to 7 are selected: If the name is not set, the description name for 0
appears. If the description name for 0 is not registered either, the Type and No values
appear.
Setting values
1 to 1017
1 to 1024
1 to 8
Adjustment
Group number of S-Bus
description name
Setting values
a)
0 to 7