Hardware Installation - D-Link DHP-P700AV User Manual

Section 2 - Installation

Hardware Installation

Power
Plug the DHP-P700AV into an AC wall outlet.
Note: Power supply is confirmed when the Power LED on the DHP-P700AV is illuminated.
Connect the Ethernet Cable
Connect the included Ethernet cable to the network cable connector located on the DHP-P700AV and attach the other end
of the Ethernet cable to the network or a PC. Network connectivity is confirmed when the Ethernet LED on the DHP-P700AV
is illuminated.
1 ROOM C
DHP-P700AV
PC
2
ROOM C
ROOM A ROOM B
DHP-P700AV
DHP-700AV DHP-700AV
AV
AV -700
DHP -700 DHP
PC
Internet Router
EXISTING PLC NETWORK
D-Link DHP-P700AV 9