Cisco TelePresence MX200 Installing Manual page 3

Installing Cisco TelePresence MX200 - Table Stand
2
Mounting the LCD video unit to the table stand
Note: Always use the provided gloves when handling
the LCD video unit to avoid stains on the unit's surface.
i Lift the LCD video unit and slide it onto the top of
the table stand. Two people working together are
required for this operation.
ii Remove the cable channel lid (see illustration to
the right) to get access to the holes for the screws.
iii Fasten the LCD video unit to the table stand using
the four screws (tool: Hexagonal screwdriver).
78-20007-03 MX200 Table Stand Installation Sheet | 2012 JANUARY | © 2011-2012 Cisco Systems, Inc. All rights reserved.
LCD video unit
27 kg / 60 lb
Table stand
Cable channel lid
(for strain relief)