Obtaining And Assigning An Ip Address; Assigning An Ip Address Using The Cli - Cisco Aironet 1300 Series Quick Start Manual

Obtaining and Assigning an IP Address

To browse to the access point/bridge's Express Setup page, you must either
obtain or assign the access point/bridge's IP address using one of the
following methods:
•
Use a DHCP server (if available) to automatically assign an IP address.
You can find out the DHCP-assigned IP address using one of the
following methods:
– Provide your organization's network administrator with your access
point's MAC address.
– Use the console port to identify the assigned address or assign one
manually.

Assigning an IP Address Using the CLI

When you connect the access point to the wired LAN, the access point/bridge
links to the network using a bridge virtual interface (BVI) that it creates
automatically. Instead of tracking separate IP addresses for the access point's
Ethernet and radio ports, the network uses the BVI.
16
78-15954-02