Cisco Aironet 1300 Series Hardware Installation Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Wireless Access Point
  5. Aironet 1300 Series
  6. Hardware installation manual

Cisco Aironet 1300 Series Hardware Installation Manual

Outdoor access point/bridge
Hide thumbs Also See for Aironet 1300 Series:
Table of Contents

Advertisement

Quick Links

Cisco Aironet 1300 Series Outdoor
Access Point/Bridge Hardware Installation
Guide
April 2005
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 526-4100
Text Part Number: OL-5048-02

Advertisement

Chapters

Table of Contents
loading

Related Manuals for Cisco Aironet 1300 Series

Summary of Contents for Cisco Aironet 1300 Series

  • Page 1 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide April 2005 Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 526-4100 Text Part Number: OL-5048-02...
  • Page 2 You can determine whether your equipment is causing interference by turning it off. If the interference stops, it was probably caused by the Cisco equipment or one of its peripheral devices. If the equipment causes interference to radio or television reception, try to correct the interference by using one or more of the following measures: •...

  • Page 3: Table Of Contents

    Key Features Power Integrated Antenna External Antenna Ethernet Ports Enclosure Connectors LEDs Operating Roles Network Configuration Examples Point-to-Point Bridge Configuration Port Aggregation or Redundancy Bridge Configuration Point-to-Multipoint Bridge Configuration Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...
  • Page 4 C H A P T E R Using the Web-Browser Interface Management Pages Using Action Buttons Character Restrictions in Entry Fields Using Online Help Connecting Locally to the Ethernet Port Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...
  • Page 5 Using no and default Forms of Commands Understanding CLI Messages Using Command History Changing the Command History Buffer Size Recalling Commands Disabling the Command History Feature Using Editing Features Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...
  • Page 6 Translated Safety Warnings A P P E N D I X Statement 84—Warning Definition Statement 245B—Explosive Device Proximity Warning Statement 346—RF Exposure Limits Statement 1001—Work During Lightning Activity Statement 1005—Circuit Breaker Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...
  • Page 7 European Community, Switzerland, Norway, Iceland, and Liechtenstein Declaration of Conformity with Regard to the R&TTE Directive 1999/5/EC Declaration of Conformity for RF Exposure Guidelines for Operating Cisco Aironet Access Points and Bridges in Japan Japanese Translation English Translation Administrative Rules for Cisco Aironet Access Points and Bridges in Taiwan...
  • Page 8 Contents Load-Dump Protection for Transportation Vehicles A P P E N D I X Load-Dump Protection L O S S A R Y N D E X Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide viii OL-5048-02...

  • Page 9: Preface

    Series Outdoor Access Point/Bridge Hardware Installation Guide. Objectives This publication explains the steps for initial setup and basic configuration of the Cisco Aironet 1300 Series Outdoor Access Point/Bridge supporting 2.4-GHz operation. This publication also provides troubleshooting information and detailed specifications.

  • Page 10: Conventions

    Tämä varoitusmerkki merkitsee vaaraa. Olet tilanteessa, joka voi johtaa ruumiinvammaan. Ennen kuin työskentelet minkään laitteiston parissa, ota selvää sähkökytkentöihin liittyvistä vaaroista ja tavanomaisista onnettomuuksien ehkäisykeinoista. (Tässä julkaisussa esiintyvien varoitusten käännökset löydät liitteestä "Translated Safety Warnings" (käännetyt turvallisuutta koskevat varoitukset).) Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...
  • Page 11 Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och känna till vanligt förfarande för att förebygga skador. (Se förklaringar av de varningar som förekommer i denna publikation i appendix "Translated Safety Warnings" [Översatta säkerhetsvarningar].) Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 12: Related Publications

    Cisco Secure Access Control Server for Windows 2000/NT Servers Version 3.0 User Guide provides complete instructions for using Cisco Secure ACS, including steps for configuring Cisco Secure ACS to support access points and bridges. This document is available on the Cisco CCO web site at the following URL: http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/csnt30/user/index.htm...

  • Page 13: Documentation Dvd

    Documentation DVD Cisco documentation and additional literature are available in a Documentation DVD package, which may have shipped with your product. The Documentation DVD is updated regularly and may be more current than printed documentation. The Documentation DVD package is available as a single unit.

  • Page 14: Cisco Product Security Overview

    Register to receive security information from Cisco. • A current list of security advisories and notices for Cisco products is available at this URL: http://www.cisco.com/go/psirt If you prefer to see advisories and notices as they are updated in real time, you can access a Product Security Incident Response Team Really Simple Syndication (PSIRT RSS) feed from this URL: http://www.cisco.com/en/US/products/products_psirt_rss_feed.html...

  • Page 15: Cisco Technical Support Website

    Use the Cisco Product Identification (CPI) tool to locate your product serial number before submitting Note a web or phone request for service. You can access the CPI tool from the Cisco Technical Support Website by clicking the Tools & Resources link under Documentation & Tools. Choose Cisco Product Identification Tool from the Alphabetical Index drop-down list, or click the Cisco Product Identification Tool link under Alerts &...

  • Page 16: Submitting A Service Request

    Cisco TAC engineer. The TAC Service Request Tool is located at this URL: http://www.cisco.com/techsupport/servicerequest For S1 or S2 service requests or if you do not have Internet access, contact the Cisco TAC by telephone. (S1 or S2 service requests are those in which your production network is down or severely degraded.) Cisco TAC engineers are assigned immediately to S1 and S2 service requests to help keep your business operations running smoothly.

  • Page 17: Definitions Of Service Request Severity

    Obtaining Additional Publications and Information Definitions of Service Request Severity To ensure that all service requests are reported in a standard format, Cisco has established severity definitions. Severity 1 (S1)—Your network is “down,” or there is a critical impact to your business operations. You and Cisco will commit all necessary resources around the clock to resolve the situation.
  • Page 18 Preface Obtaining Additional Publications and Information World-class networking training is available from Cisco. You can view current offerings at • this URL: http://www.cisco.com/en/US/learning/index.html Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide xviii OL-5048-02...

  • Page 19: Chapter 1 Overview

    C H A P T E R Overview The Cisco Aironet 1300 Series Outdoor Access Point/Bridge (hereafter called the access point/bridge) is a wireless device designed for building-to-building wireless connectivity. Operating in the 2.4-GHz band (2.400 to 2.497 GHz), using the IEEE 802.11g standard, the access point/bridge delivers 1 to 54 Mbps data rates without the need for a license.

  • Page 20: Key Features

    • Console serial interface on power injector • Receive Signal Strength Indicator (RSSI) LED patterns for easy antenna alignment • Control using Cisco IOS commands, Internet browser, SNMP, or serial interface (on power injector) • Three operating modes: • –...

  • Page 21: Power

    Note Power The access point/bridge receives inline power from the Cisco Aironet Power Injector (hereafter called the power injector). Dual-coax cables are used to provide Ethernet data and power from the power injector to the access point/bridge. The power injector is an external unit designed for operation in a sheltered environment, such as inside a building or vehicle.

  • Page 22: External Antenna

    Figure 1-1) for use with Cisco Aironet 2.4-GHz antennas. Two reverse-TNC type RF connectors are provided on the end of the unit to support single or diversity antenna configurations. The antennas connect to the access point/bridge antenna connectors using a coax cable. These are some of the external antennas supported by the access point/bridge: 5.2-dBi omnidirectional antenna with vertical polarization...

  • Page 23: Leds

    Four LEDs are located on back of the housing to report installation and alignment conditions, status, radio activity, and Ethernet activity (see Figure 1-3). Figure 1-3 LEDs Radio LED (R) Ethernet LED (E) Status LED (S) Install LED (I) Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 24: Operating Roles

    Non-root—Specifies that the access point/bridge is operating as a non-root bridge, and that it – connects to a remote LAN network, and that it must associate with a Cisco Aironet root bridge using the wireless interface. Root Access Point—Specifies that the access point/bridge operates as an access point –...

  • Page 25: Network Configuration Examples

    Figure 1-5 Port Aggregation or Redundancy Bridge Configuration Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 26: Point-To-Multipoint Bridge Configuration

    The access point configuration allows the wireless devices and the Ethernet-enabled wired devices using the workgroup bridge to pass Ethernet traffic to and from the main LAN. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 27: Workgroup Bridge Configuration

    Figure 1-9, the unit is configured in workgroup bridge mode and is associated to a Cisco Aironet root bridge as a wireless bridge device. This configuration allows the Ethernet-enabled devices pass Ethernet traffic to and from the main LAN using the workgroup bridge. The main advantage of this configuration is that the wireless communication link can be over a longer distance than an access point supports.
  • Page 28 Chapter 1 Overview Network Configuration Examples Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide 1-10 OL-5048-02...

  • Page 29: Installation Overview

    Safety Warnings, page 2-2 • Safety Information, page 2-3 • • Unpacking the Access Point/Bridge, page 2-6 Before Beginning the Installation, page 2-7 • • Installation Summary, page 2-9 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 30: Chapter 2 Installation Overview

    Statement 1024 Warning Ultimate disposal of this product should be handled according to all national laws and regulations. Statement 1040 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 31: Outdoor And Vehicle Installations

    FCC-certified equipment. When used with approved Cisco Aironet antennas, Cisco Aironet products meet the uncontrolled environmental limits found in OET-65 and ANSI C95.1, 1991. Proper operation of this radio device according to the instructions in this publication results in user exposure substantially below the FCC recommended limits.

  • Page 32: Safety Precautions

    If any part of the antenna system should come in contact with a power line, don’t touch it or try to remove it yourself. Call your local power company. They will remove it safely. If an accident should occur with the power lines call for qualified emergency help immediately. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 33: Typical Outdoor Installation Components

    Install the access point/bridge in an area where structures, trees, or hills do not obstruct radio signals • to and from the unit. • Install the access point/bridge at a height sufficient to provide a clear line-of-sight signal path. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 34: Site Surveys

    Power injector (LR2) unit (with mounting screws and wall anchors) • Power module and AC power cord • Quick Start Guide: Cisco Aironet 1300 Series Outdoor Access Point/Bridge • • Cisco Aironet 1300 Series Outdoor Access Point/Bridge Mounting Instructions •...

  • Page 35: Before Beginning The Installation

    The network administration or other IT professional responsible for installing and configuring the unit is a suitable professional installer. Following installation, access to the unit should be password protected by the network administrator to maintain regulatory compliance. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...
  • Page 36 Dual-coax Ethernet ports (F-Type connectors) Mounting lugs Figure 2-3 Power Injector Indicators and Connectors Dual-coax Ethernet ports (F-Type connectors) Ethernet LAN port (RJ-45 connector) Power LED Console serial port (RJ-45 connector) Power jack Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 37: Installation Summary

    During the installation of the access point/bridge, you will perform the following operations: • Connect a user-supplied Category 5 Ethernet cable from your wired LAN network to the power injector. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...
  • Page 38 The power module power plug to the power injector and plug the AC cord into an AC power – receptacle. For bridge installations, align the antennas. For additional information, refer to the Cisco Aironet • 1300 Series Outdoor Access Point/Bridge Mounting Instructions that shipped with your access point/bridge.
  • Page 39 • Configure security and other access point/bridge options. For additional information, refer to the Cisco IOS Software Configuration Guide for Cisco Aironet Bridges or to the Cisco IOS Software Configuration Guide for Cisco Aironet Access Points. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide...
  • Page 40 Chapter 2 Installation Overview Installation Summary Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide 2-12 OL-5048-02...
  • Page 41 The following sections are included in this chapter: Mounting the Access Point/Bridge, page 3-2 • Mounting Hardware, page 3-2 • • LEDs, page 3-5 Aligning the Bridge Antenna Using RSSI LED Indications, page 3-7 • Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 42: Mounting The Access Point/Bridge

    Typically, the access point/bridge is installed on a rooftop, mast, tower, wall, or a suitable flat surface. Each of these installations requires a different approach. This document provides a mounting overview. For detailed mounting instructions, refer to the Cisco Aironet 1300 Series Outdoor Access Point/Bridge Mounting Instructions that shipped with your unit.

  • Page 43: Window Mounting

    Connect the ground wire to the outdoor mounted access point/bridge using the supplied ground lug. Connect the power cable to the power injector. For bridge installations, align the antenna. Tighten the nuts and bolts. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 44: Access Point/Bridge Bracket

    The U-bolts provided with the roof mounting kit support mast diameters up to 1.75 in. (44.5 mm). For Note larger masts, you must supply the U-bolts to attach the access point/bridge. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 45: Leds

    Status LED Install LED When the access point/bridge running Cisco IOS 12.3(4)JA is initially powered-up, the unit defaults to a root access point with the radio disabled and no default SSID. To allow client associations, you must configure an SSID and enable the radio interface (refer to the “Configuring the Access Point/Bridge for...
  • Page 46 Because there are no timeouts, it is easier to align the antenna. Preconfigured access point or workgroup bridge modes—the bridge Install LED does not operate. • Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 47: Aligning The Bridge Antenna Using Rssi Led Indications

    3. Fast blinking rate of 4 blinks/sec. When using LEDs to maximize the signal, adjust the antenna until as many LEDs as possible are turned on and the rest are blinking as fast as possible. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...
  • Page 48 Chapter 3 Mounting and Alignment Overview Aligning the Bridge Antenna Using RSSI LED Indications Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 49: Chapter 4 Using The Web-Browser Interface

    This chapter contains these sections: Using the Web-Browser Interface Management Pages, page 4-2 • Connecting Locally to the Ethernet Port, page 4-5 • Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 50: Using The Web-Browser Interface Management Pages

    Cancel cancels any changes you made on the page and keeps you on that page. Figure 4-1 shows the web-browser interface home page. Figure 4-1 Web-Browser Interface Home Page Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 51: Using Action Buttons

    Updates status information or statistics displayed on a page. Cancel Discards changes to the page and remains on the page. Back Discards any changes made to the page and returns to the previous page. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 52: Character Restrictions In Entry Fields

    Using the Web-Browser Interface Using the Web-Browser Interface Management Pages Character Restrictions in Entry Fields Because the access point/bridge uses Cisco IOS software, there are certain characters that you cannot use in the entry fields on the web-browser interface. Table 4-2 lists the prohibited characters and the fields in which you cannot use them.

  • Page 53: Connecting Locally To The Ethernet Port

    Your PC and the access point/bridge must be configured with compatible IP addresses and subnet masks to be able to communicate on the Ethernet interface: If the access point/bridge is running Cisco IOS Release 12.2(15)JA or earlier and is configured with •...

  • Page 54: Connecting Locally To The Ethernet Port

    Chapter 4 Using the Web-Browser Interface Connecting Locally to the Ethernet Port Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...
  • Page 55 Finding the IP Address Using the CLI, page 5-13 • Assigning an IP Address Using the CLI, page 5-14 • Using a Telnet Session to Access the CLI, page 5-14 • Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 56: C H A P T E R 5 Configuring The Access Point/Bridge For The First Time

    When the access point/bridge reboots, you can reconfigure the unit by using the Web-browser interface Step 8 or the CLI (refer to the Cisco IOS Software Configuration Guide for Cisco Aironet Bridges or to the Cisco IOS Software Configuration Guide for Cisco Aironet Access Points).

  • Page 57: Default Ssid And Default Role

    IP address, the access point/bridge assigns a default IP address of 10.0.0.1. Default SSID and Default Role In Cisco IOS Release 12.3(2)JA2 and earlier, on initial power up the access point/bridge defaults to the Install-Mode role and supports these SSIDs: SSID is autoinstall for the Install-Mode role.

  • Page 58: Connecting To The Access Point/Bridge Locally

    Ethernet interface. Perform one of these operations: If the access point/bridge is running Cisco IOS Release 12.2(15)JA or earlier and is configured with default values, you must manually assign your PC an IP address from 10.0.0.31 to 10.0.0.40.

  • Page 59: Assigning Basic Settings

    Step 1 Enter the case-sensitive username Cisco in the Username field. Step 2 Enter the case-sensitive password Cisco in the Password field and press Enter. The Summary Status Step 3 page displays, which is the access point/bridge home page (see Figure 5-1).
  • Page 60 Telnet session over the wired LAN, you lose your connection to the access point/bridge. If you lose your connection, reconnect to the access point/bridge using its new IP address. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...
  • Page 61 Install Mode—Activates the bridge install and alignment mode. Specifies that the unit automatically determines the network role. If the init is able to associate to another Cisco Aironet root bridge within 60 seconds, the unit assumes a non-root bridge role. If unable to associate with another Cisco Aironet root bridge within 60 seconds, the unit assumes a root bridge role.

  • Page 62: Default Settings On The Express Setup Page

    1. After a static IP address is assigned or the role is changed from Install, the SSID is automatically changed to tsunami. 2. If an access point/bridge running Cisco IOS Release 12.3(2)JA2 or later software with a default configuration does not receive an IP address from your DHCP server, it continues to send DHCP requests indefinitely.

  • Page 63: Enabling The Radio Interfaces

    Adjusting Output Power Level Enabling the Radio Interfaces In Cisco IOS Release 12.3(4)JA, the access point/bridge radios are disabled by default, and there is no default SSID. You must create an SSID and enable the radios before the access point/bridge will allow wireless associations from other devices.
  • Page 64 Chapter 5 Configuring the Access Point/Bridge for the First Time Configuring Basic Security Settings Figure 5-3 shows the Express Security page. Figure 5-3 Express Security Page Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide 5-10 OL-5048-02...

  • Page 65: Understanding Express Security Settings

    SSIDs that you create appear in the SSID table at the bottom of the page. You can create up to 16 SSIDs on the access point/bridge. In Cisco IOS Release 12.3(4)JA, there is no default SSID and the radio is disabled by default. You must Note configure an SSID and enable the radio before client devices can associate to the access point.

  • Page 66: Express Security Limitations

    • address authentication and EAP authentication). To configure combinations of authentication types, use the Security SSID Manager page. For detailed information about security and security settings, refer to the Cisco IOS Software Note Configuration Guide for Cisco Aironet Access Points.

  • Page 67: Using The Express Security Page

    Ethernet and radio ports, the network uses the BVI. To find the IP address of your access point/bridge using the console port, you can use the Cisco IOS CLI show ip interface brief bvi1 from the privileged EXEC mode. For additional information on the CLI, refer to the“Using the Command-Line Interface”...

  • Page 68: Assigning An Ip Address Using The Cli

    Windows 2000, type open followed by the access point’s IP address. Step 3 In the Host Name field, type the access point’s IP address and click Connect. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide 5-14 OL-5048-02...
  • Page 69 Searching and Filtering Output of show and more Commands, page 6-10 • Assigning an IP Address Using the CLI, page 6-11 • Finding the Access Point/Bridge IP Address Using the CLI, page 6-11 • Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 70: Connecting To The Console Serial Port

    Console Serial Port Connector Console serial port connector (RJ-45 connector) Note The Cisco part number for the DB-9 to RJ-45 serial cable is AIR-CONCAB1200. Browse to http://www.cisco.com/go/marketplace to order a serial cable. Set up a terminal emulator to communicate with the access point/bridge. Use the following settings for Step 2 the terminal emulator connection: 9600 baud, 8 data bits, no parity, 1 stop bit, and no flow control.

  • Page 71: C H A P T E R 6 Using The Command-Line Interface

    Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges describes the IOS • commands supported by Cisco Aironet access points and bridges. This document is available on the Cisco CCO web site at the following URL: http://www.cisco.com/univercd/cc/td/doc/product/wireless/index.htm Using a Telnet Session to Open the CLI Follow these steps to open the CLI using a Telnet session.

  • Page 72: Ios Command Modes

    IOS Command Modes IOS Command Modes The Cisco IOS user interface is divided into many different modes. The commands available to you depend on which mode you are currently in. Enter a question mark (?) at the system prompt to obtain a list of commands available for each command mode.

  • Page 73: Getting Help

    Use the command without the keyword no to re-enable a disabled feature or to enable a feature that is disabled by default. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 74: Understanding Cli Messages

    Using Command History Cisco IOS software provides a history or record of commands that you have entered. This feature is particularly useful for recalling long or complex commands or entries, including access lists. You can customize the command history feature to suit your needs as described in these sections: •...

  • Page 75: Changing The Command History Buffer Size

    To disable the feature during the current terminal session, enter the terminal no history privileged EXEC command. To disable command history for the line, enter the no history line configuration command. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 76: Using Editing Features

    The buffer contains only the last 10 items that you have with the last ten items that you deleted or cut. If you press Esc Y more than ten times, you deleted. cycle to the first buffer entry. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 77: Editing Command Lines That Wrap

    To scroll back to the beginning of the command entry, press Ctrl-B or the left arrow key repeatedly. You can also press Ctrl-A to immediately move to the beginning of the line. The arrow keys function only on ANSI-compatible terminals such as VT100s. Note Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 78: Searching And Filtering Output Of Show And More Commands

    Vlan1 is up, line protocol is up Vlan10 is up, line protocol is down GigabitEthernet0/1 is up, line protocol is down GigabitEthernet0/2 is up, line protocol is up Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide 6-10 OL-5048-02...

  • Page 79: Assigning An Ip Address Using The Cli

    You can find the access point/bridge IP address using the following CLI command from the user EXEC mode: Command Purpose Step 1 show interface bvi1 Display the IP address for the interface BVI. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide 6-11 OL-5048-02...
  • Page 80 Chapter 6 Using the Command-Line Interface Finding the Access Point/Bridge IP Address Using the CLI Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide 6-12 OL-5048-02...
  • Page 81 Checking Basic Configuration Settings, page 7-6 Antenna Alignment, page 7-8 • • Resetting the Access Point/Bridge to the Default Configuration, page 7-10 Reloading the Access Point/Bridge Image, page 7-11 • Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 82: Troubleshooting

    — Transmitting and receiving Ethernet errors. amber amber — — — Firmware error—disconnect and reconnect the power injector power jack. If the problem continues, contact technical support for assistance. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...
  • Page 83 LED flashing red to count out the first digit, then a short pause, followed by the LED flashing red to count out the second digit. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...
  • Page 84 Radio not ready—contact technical support for assistance. Radio did not start—contact technical support for assistance. Radio failure—contact technical support for assistance. Radio did not flash its firmware—contact technical support for assistance. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 85: Power Injector

    When power is applied to the access point/bridge, the unit activates the bootloader and begins the POST operations. The access point/bridge begins to load the Cisco IOS image when the POST operations are successfully completed. Upon successfully loading the image, the unit initializes and tests the radio.

  • Page 86: Checking Power

    SSID is tsunami for Root AP and Workgroup Bridge roles. • In Cisco IOS Release 12.3(4)JA, on initial power up the access point/bridge defaults to the Root AP role with the radio disabled and no default SSID configured. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide...

  • Page 87: Enabling The Radio Interface

    Note can associate to either a Cisco Aironet access point or a Cisco Aironet bridge. In Cisco IOS Release 12.3(4)JA, there is no default SSID in the Root AP and Workgroup Bridge roles. Note You must configure an SSID and enable the radio interface to communicate with other wireless devices.

  • Page 88: Security Settings

    LEAP, MAC address authentication, Message Integrity Check (MIC), WEP key hashing, and 802.1X protocol versions. If a Cisco Aironet non-root bridge or a non-root access point is unable to authenticate to your root bridge or root access point, verify that the security settings are the same as your access point/bridge settings.

  • Page 89: Running The Ping Or Link Test

    When the test stops, the test results are displayed at the bottom of the page. You should check for lost packets that might indicate a possible problem with the wireless link. For best results, you should perform this test several times. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 90: Resetting The Access Point/Bridge To The Default Configuration

    Password window appears. Enter your username (default Cisco) in the User Name field. Step 3 Enter the access point/bridge password (default Cisco) in the Password field and press Enter. The Step 4 Summary Status page appears. Click System Software and the System Software page appears.

  • Page 91: Reloading The Access Point/Bridge Image

    After the access point/bridge reboots, you can reconfigure the access point/bridge by using the Step 5 Web-browser interface or the CLI (refer to the Cisco IOS Software Configuration Guide for Cisco Aironet Bridges or to the Cisco IOS Software Configuration Guide for Cisco Aironet Access Points).

  • Page 92: Browser Tftp Interface

    After the access point/bridge reboots, you can reconfigure the unit by using the Web-browser interface Step 9 or the CLI (refer to the Cisco IOS Software Configuration Guide for Cisco Aironet Bridges or to the Cisco IOS Software Configuration Guide for Cisco Aironet Access Points).

  • Page 93: Obtaining The Access Point/Bridge Image File

    Click Option 2: Aironet Wireless Software Display Tables. Step 12 Find the access point firmware and utilities section and click Cisco Aironet 1300 Series (Cisco IOS Step 13 Software). Click on the access point/bridge image file, such as c1310-k9w7-tar.123-4.JA.tar.
  • Page 94 Chapter 7 Troubleshooting Reloading the Access Point/Bridge Image Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide 7-14 OL-5048-02...

  • Page 95: Appendix

    Statement 1030—Equipment Installation, page A-10 Statement 1033—SELV-IEC 60950 DC Power Supply, page A-12 • • Statement 1040—Product Disposal, page A-13 Statement 1052—Installing and Grounding the Antenna, page A-15 • Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 96: Appendix A Translated Safety Warning

    å unngå ulykker. (Hvis du vil se oversettelser av de advarslene som finnes i denne publikasjonen, kan du se i vedlegget "Translated Safety Warnings" [Oversatte sikkerhetsadvarsler].) Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 97: Statement 245B-Explosive Device Proximity Warning

    Advarsel Ikke bruk den trådløse nettverksenheten nært inntil uisolerte fenghetter eller i et eksplosivt miljø med mindre enheten er modifisert slik at den tåler slik bruk. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 98: Statement 346-Rf Exposure Limits

    (RF), as antenas parabólicas devem ser colocadas a uma distância mínima de 22 cm em relação às pessoas. Todas as outras antenas devem ser colocadas a uma distância mínima de 20 cm em relação às pessoas. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 99: Statement 1001-Work During Lightning Activity

    Non lavorare sul sistema o collegare oppure scollegare i cavi durante un temporale con fulmini. Advarsel Utfør aldri arbeid på systemet, eller koble kabler til eller fra systemet når det tordner eller lyner. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 100: Statement 1005-Circuit Breaker

    (sovracorrente). Assicurarsi che il dispositivo di protezione non abbia un rating superiore a: 15A Advarsel Dette produktet er avhengig av bygningens installasjoner av kortslutnings (overstrøm)-beskyttelse. Påse at verneenheten ikke er merket høyere enn: 15A Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 101: Statement 1022-Disconnect Device

    Die feste Verdrahtung muß eine leicht zugängliche, zweipolige Trennvorrichtung enthalten. Avvertenza Nei cablaggi fissi va incorporato un sezionatore a due poli facilmente accessibile. Advarsel En lett tilgjengelig, topolet frakoblingsenhet må være innebygd i det faste ledningsnettet. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...
  • Page 102 Um dispositivo de desconexão de dois pólos de fácil acesso deve ser incorporado à fiação fixa. Advarsel En to-polet afmonteringsenhed med nem adgang skal integreres i det faste ledningsnet. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 103: Statement 1024-Ground Conductor

    Denna utrustning måste jordas. Koppla aldrig från jordledningen och använd aldrig utrustningen utan en på lämpligt sätt installerad jordledning. Om det föreligger osäkerhet huruvida lämplig jordning finns skall elektrisk besiktningsauktoritet eller elektriker kontaktas. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 104: Statement 1030-Equipment Installation

    Bare opplært og kvalifisert personell skal foreta installasjoner, utskiftninger eller service på dette utstyret. Aviso Apenas pessoal treinado e qualificado deve ser autorizado a instalar, substituir ou fazer a revisão deste equipamento. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide A-10 OL-5048-02...
  • Page 105 Somente uma equipe treinada e qualificada tem permissão para instalar, substituir ou dar manutenção a este equipamento. Advarsel Kun uddannede personer må installere, udskifte komponenter i eller servicere dette udstyr. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide A-11 OL-5048-02...

  • Page 106: Statement 1033-Selv-Iec 60950 Dc Power Supply

    (SELV - safety extra-low voltage) en los estándares de seguridad IEC 60950. Varning! Anslut enheten endast till en likströmsförsörjningsenhet som uppfyller kraven för SELV (skyddskretsar för mycket låg spänning) i IEC 60950-baserade säkerhetsstandarder. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide A-12 OL-5048-02...

  • Page 107: Statement 1040-Product Disposal

    Deitar fora este produto em conformidade com todas as leis e regulamentos nacionais. ¡Advertencia! Al deshacerse por completo de este producto debe seguir todas las leyes y reglamentos nacionales. Varning! Vid deponering hanteras produkten enligt gällande lagar och bestämmelser. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide A-13 OL-5048-02...
  • Page 108 O descarte definitivo deste produto deve estar de acordo com todas as leis e regulamentações nacionais. Advarsel Endelig bortskaffelse af dette produkt skal ske i henhold til gældende love og regler. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide A-14 OL-5048-02...

  • Page 109: Statement 1052-Installing And Grounding The Antenna

    Per una corretta installazione e messa a terra dell'antenna, fare riferimento ai codici nazionali e locali (es. U.S.A.: NFPA 70, Codice Elettrico Nazionale, articolo 810, Canada: Codice Elettrico Canadese, sezione 54). Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide A-15 OL-5048-02...
  • Page 110 För riktig installation och jordning av antennen, hänvisas du till nationella och lokala koder (t.ex. USA: NFPA 70, National Electrical Code, Article 810, Kanada: Canadian Electrical Code, Section 54). Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide A-16 OL-5048-02...
  • Page 111 Appendix A Translated Safety Warnings Statement 1052—Installing and Grounding the Antenna Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide A-17 OL-5048-02...
  • Page 112 Appendix A Translated Safety Warnings Statement 1052—Installing and Grounding the Antenna Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide A-18 OL-5048-02...

  • Page 113: Appendix

    European Community, Switzerland, Norway, Iceland, and Liechtenstein, page B-3 • Declaration of Conformity for RF Exposure, page B-5 • Guidelines for Operating Cisco Aironet Access Points and Bridges in Japan, page B-5 • Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 114: A P P E N D I X B Declarations Of Conformity And Regulatory Information

    The Part 15 radio device operates on a non-interference basis with other devices operating at this Caution frequency. Any changes or modification to said product not expressly approved by Cisco could void the user’s authority to operate this device. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide...

  • Page 115: Department Of Communications-Canada

    διατάξεις της Οδηγίας 1999/5/EΚ. Français: Cet appareil est conforme aux exigencies essentialles et aux autres dispositions pertinantes de la Directive 1999/5/EC. Íslenska: Þessi búnaður samrýmist lögboðnum kröfum og öðrum ákvæðum tilskipunar 1999/5/ESB. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...
  • Page 116 The above CE mark is required as of April 8, 2000 but might change in the future. Note This equipment is intended to be used in all EU and EFTA countries. Outdoor use may be restricted to certain frequencies and/or may require a license for operation. For more details, contact Cisco Corporate Compliance. Note...

  • Page 117: Declaration Of Conformity For Rf Exposure

    Guidelines for Operating Cisco Aironet Access Points and Bridges in Japan This section provides guidelines for avoiding interference when operating Cisco Aironet access points and bridges in Japan. These guidelines are provided in both Japanese and English. Japanese Translation...

  • Page 118: Administrative Rules For Cisco Aironet Access Points And Bridges In Taiwan

    Administrative Rules for Cisco Aironet Access Points and Bridges in Taiwan This section provides administrative rules for operating Cisco Aironet access points and bridges in Taiwan. The rules are provided in both Chinese and English. All Access Points and Bridges...

  • Page 119: Declaration Of Conformity Statements

    Appendix B Declarations of Conformity and Regulatory Information Administrative Rules for Cisco Aironet Access Points and Bridges in Taiwan Article 17 The operation of the low-power radio-frequency devices is subject to the conditions that no harmful interference is caused to aviation safety and authorized radio station; and if interference is caused, the user must stop operating the device immediately and can't re-operate it until the harmful interference is clear.
  • Page 120 Appendix B Declarations of Conformity and Regulatory Information Administrative Rules for Cisco Aironet Access Points and Bridges in Taiwan Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 121: Appendix

    Power module: –40 to 185 F (–40 to 85 (10,000 ft. limit) Humidity 0 to 90% (condensing) Power injector: 0 to 90% (non-condensing) Power module: 0 to 95% (non-condensing) Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 122: A P P E N D I X C Access Point/Bridge Specifications

    — BPSK (1 Mbps, 6 Mbps and 9 Mbps) QPSK (2 Mbps, 12 Mbps and 18 Mbps) 16-QAM (24 Mbps and 36 Mbps) 64-QAM (48 Mbps and 54 Mbps) Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...
  • Page 123 CSA C22.2 No. 60950 UL 60950 IEC 60950 CSA C22.2 No. 60950 EN 60950 IEC 60950 EN 60950 The power injector and power module Note must be used in an indoor environment. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 124: Bridge Operating Range

    12 dBi omnidirectional antenna 13 dBi integrated antennas Point-to-multipoint configuration 13.1 mi 10.4 mi 8.1 mi (21.1 km) (16.7 km) (13.0 km) 12 dBi omnidirectional antenna 21 dBi dish antennas Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...
  • Page 125 13 dBi integrated antennas Point-to-multipoint configuration 4.0 mi 2.3 mi 1.0 mi 0.6 mi (6.4 km) (3.7 km) (1.6 km) (1.0 km) 12 dBi omnidirectional antenna 21 dBi dish antennas Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...
  • Page 126 Appendix C Access Point/Bridge Specifications Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 127: Appendix

    This appendix lists the IEEE 802.11g (2.4-GHz) channels, maximum power levels, and antenna gains supported by the world’s regulatory domains. The following topics are covered in this appendix: Channels, page D-2 • • Maximum Power Levels and Antenna Gains, page D-3 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 128: Appendix D Channel And Antenna Setting

    9 through 11 can be used indoors and outdoors. Users are responsible for ensuring that the channel set configuration is in compliance with the regulatory standards of Mexico. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 129: Ieee 802.11G (2.4-Ghz Band

    21 (Dish) EMEA (–E) 5.2 (Omni) (100 mW EIRP maximum) 9 (Patch) 10 (Yagi) 11 (Omni) — — 12 (Omni) 13 (Integrated patch) 13.5 (Yagi) 14 (Sector) 21 (Dish) — Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 130: Changing The Access Point/Bridge Output Power

    Network Password screen appears. Enter your username (default Cisco) in the User Name field. Step 3 Enter the access point/bridge password (default Cisco) in the Password field and press Enter. The Step 4 Summary Status page appears. Click Network Interfaces and the network interface menu appears.
  • Page 131 Step 11 For additional configuration information, refer to the Cisco IOS Software Configuration Guide for Cisco Aironet Bridges or to the Cisco IOS Software Configuration Guide for Cisco Aironet Access Points. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide...
  • Page 132 Appendix D Channels and Antenna Settings Maximum Power Levels and Antenna Gains Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 133: Appendix

    This appendix identifies the pinouts for the console serial cable that connects to the power injector’s console serial port. The appendix contains the following sections: Overview, page E-2 • Signals and Pinouts, page E-2 • Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...

  • Page 134: Overview

    The access point/bridge requires a special serial cable that connects the power injector’s console serial port (RJ-45 connector) to your PC’s COM port (DB-9 connector). This cable can be purchased from Cisco (part number AIR-CONCAB1200) or can be built using the pinouts in this appendix. Signals and Pinouts Use the RJ-45 to DB-9 serial cable to connect the power injector’s console serial port to the COM port...
  • Page 135 Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Warning Statement 1030 Warning A readily accessible two-poled disconnect device must be incorporated in the fixed wiring. Statement 1022 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...
  • Page 136 10 VDC to the power injector at all vehicle operating temperatures. For vehicle cable selection criteria, refer to ISO 6722 (Road Vehicles, 60 V and 600 V Single-core Cables; Dimensions, Test Methods and Requirements). Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02...
  • Page 137 Boot Protocol. A protocol used for the static assignment of IP addresses to devices on the network. BOOTP A modulation technique used by IEEE 802.11b-compliant wireless LANs for transmission at 1 BPSK Mbps. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide GL-1 OL-5048-02...
  • Page 138 IP addresses. Direct sequence spread spectrum. A type of spread spectrum radio transmission that spreads its DSSS signal continuously over a wide frequency band. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide GL-2 OL-5048-02...
  • Page 139 Media Access Control address. A unique 48-bit number used in Ethernet data packets to identify an Ethernet device, such as an access point or your client adapter. Any of several techniques for combining user information with a transmitter’s carrier signal. modulation Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide GL-3 OL-5048-02...
  • Page 140 Ethernet networks. A feature of some Access Points that allows users to move through a facility while maintaining an roaming unbroken connection to the LAN. Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide GL-4 OL-5048-02...
  • Page 141 Glossary A connector type unique to Cisco Aironet radios and antennas. Part 15.203 of the FCC rules RP-TNC covering spread spectrum devices limits the types of antennas that may be used with transmission equipment. In compliance with this rule, Cisco Aironet, like all other wireless LAN providers, equips its radios and antennas with a unique connector to prevent attachment of non-approved antennas to radios.
  • Page 142 Glossary Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide GL-6 OL-5048-02...
  • Page 143 EIRP, maximum 5-9, D-3 getting help environmental conditions history error messages, during command entry changing the buffer size described disabling recalling commands no and default forms of commands Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide IN-1 OL-5048-02...
  • Page 144 Cisco cable serial port connector 2-8, 6-2, 7-5 site survey size management options, CLI SSH Communications Security, Ltd. modulation SSID, troubleshooting network configurations no commands Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide IN-2 OL-5048-02...
  • Page 145 EXEC mode warning, defined x to xi, A-2 to A-3 warnings 2-2, A-1 Web-based interface, common buttons weight Wi-Fi Protected Access (WPA) 5-12 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide IN-3 OL-5048-02...
  • Page 146 Index Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide IN-4 OL-5048-02...

This manual is also suitable for:

Air-br1310g-a-k9Air-br1310g-a-k9-r

Table of Contents