Installing Antennas For Cisco 890 Series - Cisco 860 Installing Manual

Chapter 2 Installing the Router
Installing the Cisco 860, 880, 890 ISR
If the FIPS covers are installed with the rack mount brackets, the adapter plates are not required in the
Step 8
installation.

Installing Antennas for Cisco 890 Series

The Cisco 890 series wireless routers have three reverse-polarity threaded Neill-Concelman (RP-TNC)
connectors on the back panel. The antennas that are shipped with the router are dual-band 2.4-GHz to
5-GHz omnidirectional dipole antennas.
All wireless LAN products in the 5.2/5.3GHz band cannot be used outdoors. Use the product only
Warning
indoors. Statement 372
Before you install the Cisco 890 series wireless router on a table, wall, or rack, connect the antennas to
Note
the back panel. It is difficult to attach the antennas after the router is installed.
Cisco Integrated Services Router Hardware Installation Guide
2-52