Function Code Transmit - Honeywell ORBIT 7190G Quick Start Manual

Scan the following code to program the scanner to emulate a
regular RS232-based COM Port. Apple® Macintosh computers
recognize the scanner as a USB CDC class device and automati-
cally use a class driver.
USB Serial
Note: No extra configuration (e.g., baud rate) is necessary.

Function Code Transmit

When this selection is enabled and function codes are con-
tained within the scanned data, the scanner transmits the func-
tion code to the terminal. Charts of these function codes are
provided in your User's Guide. When the scanner is in keyboard
wedge mode, the scan code is converted to a key code before it
is transmitted.
Enable
(Default)
Disable