Cabinet and Rack Installation
Quantity
16
Required Equipment
You need the following equipment for this installation:
• Number 2 Phillips screwdriver
• Tape measure and level (to ensure shelf brackets are level)
Installing the Shelf Bracket Kit into a Two-Post Telco Rack
The following figure shows the installation of the shelf bracket kit into a two-post Telco rack.
Figure 15: Installing the Shelf Bracket Kit into a Telco Rack
Part Description
10-24 x 3/4-in. Phillips screws
Cisco MDS 9396S Multilayer Fabric Switch Hardware Installation Guide
Before Installing the Shelf Brackets
45