Pressure Roller - Toshiba e-STUDIO206L Service Manual

4.13.8

Pressure roller

(1) Take off the pressure roller unit
( P. 4-112 "4.13.2 Fuser roller unit /
Pressure roller unit").
(2) Remove 3 screws and take off the entrance
guide.
(3) Take off the front cover.
(4) Disconnect 1 connector, and then take off the
fuse cover while holding a hook.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
DISASSEMBLY AND REPLACEMENT
Pressure roller unit
Hook
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 120
Entrance guide
Fig. 4-341
Front cover
Fig. 4-342
Fuse cover
Fig. 4-343