(3)
Remove 4 screws and then take off the inner
duct.
(4)
Take off the TRU fan.
4.11.14 Transfer roller unit
(1)
Open the automatic duplexing unit.
(2)
Release the hook on the rear side and then
take off the transfer roller unit.
Notes:
1. Be careful not to drop the spring.
2. When installing the charger, pay attention
to the position of the spring.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-275
TRU fan
Fig. 4-276
Fig. 4-277
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 97
Inner duct
Transfer roller unit
DISASSEMBLY AND REPLACEMENT
4