Right Front Cover; Left Front Cover; Fig - Toshiba e-STUDIO206L Service Manual

(4) Remove 1 screw and take off the right rear
cover-2 [1].
4.1.14

Right front cover

(1) Take off the front cover.
( P. 4-3 "4.1.6 Rear cover").
(2) Take off the process unit.
( P. 4-100 "4.12.1 Process unit").
(3) Pull out the upper and lower drawers.
(4) Open the feed cover.
(5) Remove 2 screws. Release 4 hooks by
sliding the right front cover downward, and
then take off the right front cover by pulling
out toward you.
Remarks:
When installing the right front cover, hang
the 4 hooks of the right front cover on the
frame of the equipment, and then fix it with 2
screws.
4.1.15

Left front cover

(1) Take off the inner tray
( P. 4-4 "4.1.9 Inner tray").
(2) Take off the right front cover
( P. 4-7 "4.1.14 Right front cover").
(3) Remove 4 screws. Disconnect 3 connectors
from the left front cover, and then take off the
left front cover.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved

Fig. 4-19

Fig. 4-20
Left front cover
Fig. 4-21
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 7
[1]
Right front cover
DISASSEMBLY AND REPLACEMENT
4