Siemens HiPath 3000 Service Manual page 828

wclient.fm
Workpoint Clients
optiPoint 500
Table 10-3 System-Specific Maximum Configuration for U
Devices, and Adapters
Workpoint Clients, Add-On Devic-
es, Adapters
optiset E analog adapters
Number per system
optiset E control adapters
Number per system
optiset E data adapters
Number per system
optiset E speech adapters
Number per system
optiset E privacy modules
Number per system
optiset E ISDN adapters
Number per system
optiset E phone adapters
Number per system
optiset E key modules
Number per system
optiset E BLFs
Number per system
1 Testing is not required on stations and lines up to the maximum configuration. Configurations that contain UCD/ACD or
more than one SLCN or groups with more than 10 stations should always be checked using the project planning tool (in-
tranet: http://intranet.mch4.siemens.de/syseng/perfeng/tools/hpt/index.htm).
2 Depending on the system configuration and performance, the specified capacity limits may not always be achieved. To
ensure that the dynamic capacity limit of HiPath 3750 or HiPath 3700 is not exceeded, the configuration can be tested
using the project planning tool (intranet: http://intranet.mch4.siemens.de/syseng/perfeng/tools/hpt/index.htm). Testing is
not required for configurations of up to 250 stations and 90 lines. Configurations that contain UCD/ACD or more than one
SLC16/SLC16N or groups with more than ten stations should always be checked using the project planning tool.
3 8xU at the central board + 5xSLU8 + 1xSLMO24.
P0/E
4 8xU at the central board + 5xSLU8R.
P0/E
5 8xU at the central board + 2xSLU8.
P0/E
6 8xU at the central board + 2xSLU8R.
P0/E
7 The total number of U
8 If the total number of U
72, an external EPSU2 power supply unit must be used.
9 If the total number of U
UPSC-DR must be used.
10-32
stations and additional stations connected using an adapter is limited to 384.
P0/E
stations, analog stations and additional stations connected using an adapter is greater than
P0/E
stations and additional stations connected using an adapter is greater than 24, a UPSC-D/
P0/E
HiPath HiPath
1
3800 3750
HiPath
3700
7
116 116
50 50
7
116 116
7
116 116
100 100
12 12
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
Workpoint Clients, Add-On
P0/E
SYSTEM
HiPath HiPath HiPath
3550 3500 3350
8 8
24 24
No restriction
48 48
No restriction
No restriction
8 8
48 48
8 8
48 48
100 100
6 6
P31003-H3550-S403-4-7620, 02/05
HiPath
3300
9 9
8 8
16 16
9 9
8 8
9 9
24 24
30 30
– –