6
HiPath 5000 Startup and Administration
6.1
Overview
Chapter contents
This chapter discusses the topics listed in the following table.
Introduction, page 6-2
Software Structure, page 6-5
Notes on Open Numbering in a HiPath 3000/5000 Network, page 6-8
Installation Requirements, page 6-9
HiPath 5000, page 6-12
Preparing for Installation, page 6-12
●
Integrating the HiPath 5000 Server in the Customer LAN, page 6-13
●
HiPath 5000 Installing Standard Components, page 6-14
●
Installing HiPath ComScendo Service, page 6-21
●
Installing HiPath Fault Management, page 6-30
●
Installing the TAPI Service Provider, page 6-34
●
Installing the HiPath Inventory Server Separately, page 6-35
●
Verifying Installation, page 6-40
●
Modifying HiPath 5000 Components (Retro-Fitting, Updating, Deleting), page 6-42
Performing Licensing, page 6-44
Optimizing Operating System Settings, page 6-45
Perform HiPath 5000 Basic Configuration, page 6-47
Configuring HiPath 5000 with HiPath ComScendo Service, page 6-48
●
Configuring HiPath 5000 Server as a Central Administration Unit in an IP Network, page
●
6-49
HiPath Manager PCM, page 6-53
GetAccount, page 6-54
Parameters for Call Data Export, page 6-54
●
Connecting an Uninterruptible Power Supply to HiPath 5000, page 6-59
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
HiPath 5000 Startup and Administration
Topic
start_h5.fm
Overview
6-1