Cisco NSS32 Administration Manual page 155

Managing the System
Network Services
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
STEP 9
Cisco Small Business NSS300 Series Smart Storage Administration Guide
To use virtual host, follow these steps:
Choose Network Services > Web Server > Virtual Host from the Navigation
menu. The Virtual Host window opens.
Click Enable Virtual Host. After enabling virtual host, you can create multiple
websites by uploading web files to each folder.
Click Apply.
Click Create New Virtual Host. The Create New Virtual Host window opens.
Enter the following parameters:
• Host Name—Enter the host name. For example, site1.mysite.com.
• Folder Name—Specify the folder (in the Web directory) where the web files
will be uploaded to. For example, site1.mysite.
• Protocol:
• HTTP—Click to specify HTTP protocol for the connection.
• HTTPS—Click to specify HTTPS protocol for the connection. If you
select HTTPS, verify that the option Enable Secure Connection (SSL) is
enabled in Network Services > Web Server.
• Port—Enter the port number for the connection.
• Action—Click the Property icon to open the Modify Virtual Host window
and reconfigure the current settings.
Click Apply.
Continue to enter the information for the remaining sites you want to host on the
NAS. Create a folder for each website (For example, site1_mysite, site2_mysite,
and www_mysite2).
Start transferring the website files to the corresponding folders. For example:
• Transfer the Joomla files to site1_mysite
• Transfer the phpBB3 files to site2_mysite
• Transfer the WordPress files to www_mysite2.com
When the files transfer is complete, point your web browser to the websites. Use
http or https, depending on your connection settings:
3
155