Makita 6833 Instruction Manual page 9

Installing or removing the bit
CAUTION:
Always be sure that the tool
is
switched off and unplugged before installing or removing
the bit.
Loosen the thumb screw which secures the casing. Pull out the casing in the direction of
the arrow. Press the dust cover toward the plane bearing and pull out the bit. If the dust
cover cannot be moved as far as the plane bearing, try it again after turning the bit slightly.
To install the bit, insert
it
into the socket while turning
it
slightly. After installing, always
make sure that the bit
is
securely held in place
by
trying to pull
it
out.
Casing
- ,
I
Plane bearing
Dust
cover
0
Bit
Extension handle (optional accessory)
Use of extension handle allows
you
to drive
screws into floors while standing.
9