Back Box Options - Cisco SCH-7IN-TS-B/W Reference Manual

Back Box Options

Back Box Options
The Cisco In-wall Display Back Box is required for installation of a Cisco In-wall Display. It comes in
plastic and metal, as a new installation or retrofit installation. The type of Back Box required is
dependent on the specific project requirements. It must be purchased separately.
Table 1
Product
Cisco Smart+Connected In-Wall Back Box, New Construction
Cisco Smart+Connected In-Wall Back Box, Retrofit
Figure 2
Cisco Smart+Connected 7" In-wall Display Reference Guide
4
Back Box Part Numbers: Cisco In-wall Display
New Installation Back Box Options
Part Number
SCH-NEWBB-PLS (for plastic)
SCH-NEWBB–MET (for metal)
SCH-RTRBB-PLS (for plastic)
SCH-RTRBB–MET (for metal)
OL-27263-01