Makita HK0500 Technical Information page 5

3. Repair of Clunk housing
Disassembly:
1) Remove Tapping screw4x18(2pcs), and pull out
Clunk housing cover. (Fig.9).
2) Remove Tapping screw4x16(4pcs) and Clunk cap.
(Fig.10)
3) Remove Retaining ring (hole) R-38 and pull out Tool
holder. (Fig.11)
4) Take out Piston from Clunk housing. (Fig.10)
Tapping screw 4x18
Clunk housing cover
Fig. 9
Fig. 10
Fig. 11
Tapping screw 4x16
Clunk cap
O Ring 53
Piston
Retaining ring (hole) R-38
Clunk housing
Tool holder