Makita HK0500 Technical Information page 2

Shape for easy use
The length and shape suitable for tile tearing ,
putting Motor laterally.
Improved Dust-proof
Owing to applying a dust-proof
cap with lip, it is prevented that
dusts enter from the top end.
Light weight
MAKITA #HK0500:
3.1kgs (6.8 lbs)
B y o n l y i n s e r t i n g B i t a n d s e a r c h i n g
grooves, you can install Bit.
Tough body
The strength is enough to bear if you
use it gouging like a bar.
Barrel part easy to be gripped
Very comfortable to grip because of its
proper thickness and length ( 58x100mm,
One-touch sliding chuck
Low Vibration
2-1/4" x 3-15/16" )
Bit can be fixed at 12 levels
of degreed position.
The strength is enough to
bear if you use it gouging
like a bar.
Whole plastic body
If Bit touches electric wires in the
wall, electric shock is rarely conveyed
to a worker because the whole outer
surface is covered by plastic.
With dial of variable/stepless speed
You can do finer chipping works, and
operate the dial, pulling Trigger.
Large L-shape handle
Large and round Handle shape is easy
to grip.
Large Trigger switch
Your fingers will not be exhausted
even after a long time operation.
Thick commutator
Effective thickness of Segment in
Commutator has been made to be as
twice big
as that of #HK1810. Also, it is
protected from radiant heat and dust
particles by