On-Demand Location Trigger; Figure 412: On-Demand Location Trigger; Table 378: On-Demand Location Trigger - D-Link DWL-8600AP User Manual

D-Link UWS User Manual

On-Demand Location Trigger

Use the On-Demand Location Trigger page to find the location of an AP or wireless client. You can request the
location of an AP or a client which is already detected by the system, or specify a MAC address of the device
that has not yet been detected.
The following table shows the fields available on the On-Demand Location Trigger page.
Field
Building Number
Floor Number
Type of Device
Device MAC
Target Device MAC Address
Use Operational Mode Radios
Number of Locator APs
Location Procedure Status
D-Link
Oct. 2015

Figure 412: On-Demand Location Trigger

Table 378: On-Demand Location Trigger

Description
Select the number that identifies the building to be searched for
devices. Select All to search all buildings.
Select the number that identifies the floor of the building to be
searched for devices. Select All to search all floors within the selected
building.
Specify whether to search for APs or wireless clients.
If the checkbox is clear, specify the MAC address of the device to locate
in the Target Device MAC Address field.
If the checkbox is selected, you can choose the target device MAC
address from a list of MAC addresses of devices that have already been
detected.
Specify the MAC address of the device to find.
If the checkbox is clear, only the radios that are configured to be in
sentry mode perform the search.
If the checkbox is selected, both sentry and operational radios
participate in the search.
Identifies the number of managed APs that will participate in the
search.
Identifies whether the On-Demand Location procedure is currently
running. The status is either Not in Progress or In Progress.
Locating WLAN Devices
Unified Wired and Wireless Access System
Page 655