D-Link DWL-3600AP Specifications

Product Highlights
Fast 300Mbps 2.4GHz 802.11n Wireless Radio
Supports 2x2 MIMO 802.11b/g/n with throughput
speeds up to 300Mbps.
Flexible Housing Design
Embedded antennas and plenum rated housing for
non-intrusive and safe deployment in any indoor
application.
Wireless Management Support
Works with DWC-1000 Wireless Controller and
DWS-3160/4026 Unified Wireless Switch for larger AP
installations that require centralized configuration and
management.
DWL-3600AP
Unified N Access Point
Features
Ideal for Business
• Blazing wireless performance of up to 300 Mbps
throughput
• Configuration Replicating Clusters reduce configuration
complexity
• Up to 16 virtual access points may be created from a
single device
• Automatic load-balancing among neighboring access points
• Flexible QoS with WMM
Trusted Security
• WPA/WPA2 Personal
• WPA/WPA2 Enterprise
• WEP Encryption
• 802.1X User authentication
• MAC address filtering
• Rogue AP detection
Convenient Installation
• Can be easily mounted on a wall or ceiling
• 802.3af Power Over Ethernet enables installation at
in hard-to-reach locations
• Mounting brackets are included
The DWL-3600AP Unified 802.11n Access Point is an indoor 802.11n Wi-Fi access point
designed specifically for deployment in business environments. Highly manageable and
1 network
capable of high data transmission speeds, the DWL-3600AP integrates seamlessly into
existing network infrastructure and can be easily scaled up to meet future demands.
High Performance
The DWL-3600AP's 2x2 MIMO 2.4GHz radio delivers up to 300 Mbps
throughput. In addition, the DWL-3600AP features RadioProtect technology, which
ensures all users receive an adequate level of service even in an environment where many
users are accessing the network through legacy 802.11b and 802.11g devices.
Configuration Replicating Clusters
For small businesses that need to deploy multiple access points (APs) but lack the resources
to tackle the complicated task of network management, the DWL-3600AP's Configuration
Cluster feature offers the ideal solution. When a small number of DWL-3600APs is
deployed on the network, they may be configured to form a Replicating Cluster. Once the
administrator is through with configuring one access point, the same configuration can
then be applied to all remaining APs that are members of that cluster. Up to 16 APs may be
used to form a cluster.
1 of network