Honeywell NetAXS-123 Startup Manual page 23

NetAXS-123 Startup Guide, Document 800-05780V2
NOTE: If using EVL, DIP switch addresses are not used as
addressing is configured in the web browser. Refer to Appendix A
for additional details.
©
2013 Honeywell, Inc. www.Honeywell.com
a
DIP Switch 7 does NOT require a panel reboot to take effect. This does not affect the
USB IP address.
b
Both DIP Switch 8 and DIP Switch 9 need to be either ON or OFF to be properly
configured.
c
S10 is not used. Default is OFF.
d
When used in EVL mode, panels ignore S1-S5, and address is assigned in web
programming. In this case leave address switches as default.
23