Control Elements - Honda AS 65 4T Operating Instructions Manual

Control elements

3 7
2
6
Accelerator lever with choke (1)
With the accelerator lever, you change the
engine speed and thus control the engine
output.
Choke: Choke is closed (only
for engine start when engine is
cold)
MIN: Neutral position
MAX: Full throttle
Drive lever with parking brake (2 )
With the drive lever, you switch the drive and
the parking brake on and off.
Drive on / parking brake
off (I):
Press the lever towards
the handlebar and contin-
ue to hold.
Drive off / parking brake
on (0):
Release the lever.
10
5 4 1
Blade clutch lever (3)
The blade clutch lever is a safety device.
When you release the lever the blade comes
to a standstill within 7 seconds
Engaging blade (I):
I
Lift the blade clutch lever,
engage the latch knob (87) and
0
M
press the blade clutch lever
towards the handlebar.
Disengaging blade (0):
Release the blade clutch lever
and set the accelerator lever to
MIN.
Engine stop switch (5)
Switch the ignition on and off with the
engine stop switch. When you switch
off the ignition, the engine is switched
off.
0: OFF
I: ON
Lever for lateral adjustment of handlebar (4)
1. Release the eccentric tension lever.
2. Attention: Do not crush the Bowden cables
when pivoting the handlebar.
Swivel the handlebar to the side to the de-
sired position.
3. Clamp the handlebar with the eccentric
tension lever.
Height adjustment of handlebar
You adjust the height of the handlebar with the
screw for the height adjustment of the handle-
bar (see Assembly).