Cisco Service Manual Service Manual page 95

Cisco TelePresence SX20 Quick Set
Contents
Video OSD Mode
The Video OSD (On Screen Display) Mode lets you define if information and icons should be
displayed on screen.
Requires user role: ADMIN
Value space: <Off/On>
Off: Hide the on screen menus, icons and indicators.
On: Display the on screen menus, icons and indicators.
Example:
Video OSD Mode: On
Video OSD MenuStartupMode
Configures the state of the OSD (On Screen Display) menu after a video system / codec boot.
The setting only applies when the video system is operated by a remote control and the on-
screen menu.
Requires user role: ADMIN
Value space: <Closed/Home>
Closed: The OSD menu will NOT expand automatically. This setting is recommended for 3rd
party integrations that need full control of what is shown on the OSD.
Home: The OSD menu will show the home menu expanded.
Example:
Video OSD MenyStartUpMode: Home
Video OSD VirtualKeyboard
Determine whether or not the virtual keyboard will automatically show on screen when text is
to be entered in an input field. The setting only applies when the video system is operated by a
remote control and the on-screen menu.
Requires user role: ADMIN
Value space: <UserSelectable/AlwaysOn>
UserSelectable: The user has to press a softbutton to open or close the virtual keyboard.
AlwaysOn: The virtual keyboard is automatically shown on screen as long as text can be
entered in an input field.
Example:
Video OSD VirtualKeyboard: UserSelectable
D14908.02 SX20 Administrator Guide TC6.0, JANUARY 2013.
Introduction Web interface System settings System settings
Video OSD EncryptionIndicator
Define for how long the encryption indicator (a padlock) will be shown on screen. The setting
applies to both encrypted and non-encrypted calls, i.e. both to secure and non-secure
conferences. The icon for encrypted calls is a locked padlock, and the icon for non-encrypted
calls is a crossed out locked padlock.
Requires user role: ADMIN
Value space: <Auto/AlwaysOn/AlwaysOff>
Auto: If the Conference Encryption Mode setting is set to BestEffort and the call is
encrypted, the encryption indicator is shown during the first seconds of a call. If the
Conference Encryption Mode setting is set to BestEffort and the call is non-encrypted, the
crossed out encryption indicator is shown during the entire call. If the Conference Encryption
Mode setting is NOT set to BestEffort, the encryption indicator is not shown at all.
AlwaysOn: The encryption indicator is displayed on screen during the entire call. This applies
to both encrypted and non-encrypted calls for all Conference Encryption Mode settings.
AlwaysOff: The encryption indicator is never displayed on screen. This applies to both
encrypted and non-encrypted calls for all Conference Encryption Mode settings.
Example:
Video OSD EncryptionIndicator: Auto
Video OSD MissedCallsNotification
Determine whether or not the OSD (On Screen Display) shall display a missed calls notification
dialog box if there have been incoming calls that have not been answered. The setting only
applies when the video system is operated by a remote control and the on-screen menu. When
using a Touch controller the notification dialog box will appear on the Touch display, and not on
the OSD.
Requires user role: ADMIN
Value space: <Off/On>
Off: The OSD will NOT show any indication that there have been any missed calls. This
setting is recommended for 3rd party integrations that need full control of what is shown on
the OSD.
On: The OSD will show a notification of missed calls.
Example:
Video OSD MissedCallsNotifications: On
www.cisco.com — Copyright © 2012-2013 Cisco Systems, Inc. All rights reserved.
95
Administrator Guide
Setting passwords Appendices