Zero Configuration Setup - D-Link DCS-6004L? DCS-6005L Quick Install Manual

Zero Configuration Setup

If you have a D-Link Cloud Router, you can take advantage of Zero Configuration
Setup. This feature automatically configures your camera's settings for you and
adds it to your mydlink account. If you do not have a D-Link Cloud router, you can
use the Setup Wizard to install and configure your camera. (Refer to instructions
on the next page.)
Remove the camera housing by squeezing housing
1
release buttons on both sides of the camera.
Connect the included Ethernet cable to the network cable
2
connector located on the camera, and attach it to the
network.
If you have the DCS-6004L and you will be using Power
3
over Ethernet, you can skip this step. Otherwise, attach
the external power supply to the power input connector
located on the inside of the camera, and connect it to a
wall outlet or power strip.
Reattach the camera housing by lining up the access
4
port on the housing with the access port on the camera
base. Firmly push down until the camera housing snaps
back onto the camera base.
5