Circuit Diagram; Electrical Wiring; Compliance - Buffalo l310 Manual

Circuit Diagram

Note: This circuit diagram has been provided to assist qualified technicians. Do not
remove any components or service panels on the appliance.
L
N
E

Electrical Wiring

This appliance is supplied with a 3 pin, moulded, BS1363 plug and lead, with a 13 amp fuse as standard.
The plug is to be connected to a suitable mains socket.
This appliance is wired as follows:
• Live wire (coloured brown) to terminal marked L
• Neutral wire (coloured blue) to terminal marked N
• Earth wire (coloured green/yellow) to terminal marked E
This appliance must be earthed, using a dedicated earthing circuit.
If in doubt consult a qualified electrician.
Electrical isolation points must be kept clear of any obstructions. In the event of any emergency
disconnection being required they must be readily accessible.

Compliance

BUFFALO parts have undergone strict product testing in order to comply with regulatory standards and
specifications set by international, independent, and federal authorities.
BUFFALO products have been approved to carry the following symbol:
Thermal
Cutting Device
Main Switch Thermostat
Indicator
Lamp
5
Heating
Element