Maintenance References - Polaris Outlaw 500 Service Manual

MAINTENANCE

Maintenance References

1. Engine Oil and Filter
Oil Filter Location
III. # Item
Engine Oil /
1.
Transmission
2. Brake Fluid
3. Drive Chain
* More often under severe use, such as operation in mud, water, sand or under severe loads.
** Every 10 hours of operation (refer to Maintenance Schedule for additional information). Change more often in extremely dirty
conditions such as continuous operation in water, mud or sand, continuous hot, cold, or short trip cold weather operation.
NOTE: Excessive clutch plate residue will accelerate oil change intervals.
*** Every 24 months or 200 hours of operation (refer to Maintenance Schedule for additional information).
More often under severe conditions such as continuous operation in water, mud or sand.
2.8
2. Brake Fluid
(Right hand and Foot
Brake Master Cylinder)
Sight
Glass
Lube Rec.
Polaris PS-4 Synthetic
Fill master cylinder reservoirs
Polaris DOT 3 or DOT 4
Brake Fluid
Apply to chain link plates and
Polaris Chain Lube
Fill to Indicated
Level
Method
Check dipstick and add to
proper level.
to indicated level inside
reservoir.
rollers.
3. Rear Drive Chain
Frequency*
Perform break–in oil / filter
change at one hour; change oil
every 10hrs / 100mi. **
As required. Change fluid every
2 years or 200 hours. ***
As required *
RepairPro Service Manual