Honda Accord 4D 2003-2006 Owner's Manual page 468

03/09/03 15:15:28 32SEA610_468
NOTE:
The power supply of the air
compressor is limited from 12 volt
DC accessories of the vehicle.
Directions
Before using the air compressor,
drive your vehicle to the road
shoulder and stop in a safe place that
is far away from the traffic lanes.
Step 1.
Remove the valve cap from a flat
tyre and securely connect the air
compressor hose to the valve.
Step 2.
Connect the power plug of the air
compressor to the socket of the
cigarette lighter.
Step 3.
Turn the ignition switch to
ACCESSORY (I) position. Turn on
the air compressor switch and
inflate a tyre to the specified air
pressure. Check the tyre pressure
by using the air pressure gauge on
the compressor.
Honda IMS (For some types)
Turn off the switch on the air
compressor before checking the air
pressure.
Step 4.
When the tyre is inflated to
specified air pressure, disconnect
the power plug from the cigarette
lighter socket. Make sure not to
leak the air from the tyre. Then
install and tighten the valve cap
securely.
Taking Care of the Unexpected
465