FUNCTIONAL
DESCRIPTION
1. Lock button
2. Switch trigger
ASSEMBLY
1. Side grip
1
2
1. Rubber pad
2. Wool bonnet
3. Lock nut
CAUTION:
•
Always be sure that the tool is switched off and unplugged before
adjusting or checking function on the tool.
Switch action
003434
CAUTION:
•
Before plugging in the tool, always check to see that the switch trigger
actuates properly and returns to the "OFF" position when released.
To start the tool, simply pull the switch trigger. Release the switch trigger to
1
stop.
2
For continuous operation, pull the switch trigger and then push in the lock but-
ton.
To stop the tool from the locked position, pull the switch trigger fully, then
release it.
CAUTION:
•
Always be sure that the tool is switched off and unplugged before
carrying out any work on the tool.
Installing side grip (auxiliary handle)
003447
CAUTION:
•
Always be sure that the side grip is installed securely before operation.
1
Screw the side grip on the tool securely.
Installing or removing the wool bonnet
003464
Mount the rubber pad onto the spindle. Screw the lock nut onto the spindle.
3
5