Functional Description - Makita 6952 Instruction Manual

FUNCTIONAL
DESCRIPTION
1
1. Switch trigger
A
1
1. Reversing switch lever
ASSEMBLY
12 mm
(15/32")
CAUTION:
• Always be sure that the tool is switched off and unplugged before
adjusting or checking function on the tool.
Switch action
004353
CAUTION:
• Before plugging in the tool, always check to see that the switch trigger
actuates properly and returns to the "OFF" position when released.
To start the tool, simply pull the switch trigger. Tool speed is increased by
increasing pressure on the switch trigger. Release the switch trigger to stop.
Holding the tool
Hold the tool only by the handle when performing an operation. Do not touch
the metal part.
Reversing switch action
004354
This tool has a reversing switch to change the direction of rotation. Depress
the reversing switch lever from the A side for clockwise rotation or from the B
side for counterclockwise rotation.
CAUTION:
B
• Always check the direction of rotation before operation.
• Use the reversing switch only after the tool comes to a complete stop.
Changing the direction of rotation before the tool stops may damage the
tool.
CAUTION:
• Always be sure that the tool is switched off and unplugged before
carrying out any work on the tool.
Installing or removing driver bit or socket bit
001266
Use only the driver bit or socket bit shown in the figure. Do not use any other
driver bit or socket bit.
9 mm
(3/8")
5