Unpacking - Honeywell Avanza SE.40B1 User Manual

UNPACKING

Congratulations on purchasing your Honeywell Avanza™ Television. To en-
joy the full experience of your Honeywell Avanza™ TV, please make sure
you have access to HD programming.
Carefully remove your new TV and all other items from the box.
NOTE: We strongly recommend that two people perform the unpacking,
setup and assembly of the television due to its weight and size.
Inside the box you will find:
- LED LCD FULL HD TV and Removable TV Stand
- Remote Control and (2) AAA 1.5VDC Batteries
- User Manual
- Quick Start Guide
- Registration Card/Warranty Card
ATTACHING THE TV STAND
NOTE: If you wish to wall mount your TV, please advance to pg. 4.
1. Place your TV face down on a clean flat surface. To avoid scratches, we
recommend using a blanket or a soft surface such as a bed or couch.
2. Remove all plastic film on the base and pedestal. Slide the pedestal
cover over the pedestal, aligning the holes on the cover with the notches
on the bottom of the pedestal.
3. Place the base ring over the bottom groove of the pedestal cover. (as
pictured)
4. Attach the base and insert the included screws (6x) on the bottom of the
base then tighten. (as pictured)
5. Place TV in the upright position.
CAUTION: Avoid applying pressure to the front panel or bezel of the TV.
This may severely compromise the integrity of the television. The warranty
does not cover abuse or improper installation.
SE.40B1 User Manual
3