Troubleshooting - Honeywell Avanza SE.40B1 User Manual

TROUBLESHOOTING

General Problems
Receive the message
"No Signal"
Remote Control does
There is a distorted
picture or unusual sound
The TV has dark or
colored pixels (dots)
Need some help?
Call our toll free customer service number: (888) 441-0121
Hours of operation: Mon - Fri 9AM - 7PM EST
Sat & Sun 9AM - 5PM EST
- Press the input button on your remote to select a
different input source.
- Make sure all cables from your devices are
securely connected.
- If you are on the TV source, scan for channels to
confirm there is data in your Channels List
- Make sure the power button is On. (Power Light
No Power
should be green)
- Make sure the power cord is securely connected.
- Test a separate device to verify the power outlet is
working properly.
- Press the VOL+ button.
No Sound
- Press the MUTE button on your remote to verify
that it is not ON.
- Check the OTHERS menu to verify that AUDIO
ONLY is not checked.
- Make sure that headphones are not connected.
- Make sure the remote control is pointed directly at
the remote sensor.
not work
- Remove any obstacles that maybe blocking the
remote sensor.
- Replace the batteries.
- You may be experiencing interference from other
electrical appliances, cars, or fluorescent lights.
Please try moving your TV to another location.
- Your Honeywell TV is manufactured to the highest
possible level of precision, however, sometimes
some pixels may not display. Pixel (dots) defects
within industry specifications are inherent to this
type of product and do not warrant a defective
product.
Possible Solution
32
SE.40B1 User Manual