Scanning For Channels - Honeywell Avanza SE.40B1 User Manual

SCANNING FOR CHANNELS

AUTO CHANNEL SEARCH
To automatically scan for TV channels that are available in your area, begin
by entering the Channel Menu.
1. Select your appropriate Signal Type dependent on what is connected to
your Antenna/Cable Input.
A. Air for devices such as a Digital Antenna
B. Cable for direct cable connections (with or without a Cable
Satellite box)
2. Select 'Auto Channel Search' in the CHANNEL menu. Once it is
highlighted, press the ENTER button on your remote to begin scanning.
Your TV will now scan for available analog and digital channels. Once
the scanning is complete, all detected channels will be added to your
Channel List.
NOTE: If your HDTV is connected to a cable or satellite box through the
HDMI or component inputs, you will not need to scan for channels.
24
SE.40B1 User Manual