Cleaning & Care - Black & Decker BPACT08 SERIES Instruction Manual

Table of Contents

Advertisement

SET UP & USE
CLEANING
Before cleaning or maintenance, turn the appliance off by pressing the
on the control panel or
then unplug from the electrical outlet.
CLEANING THE CABINET
You should clean the appliance with a slightly damp cloth then dry with a dry
cloth.
• Never wash the air conditioner with water. It could be dangerous/
• Never use petrol, alcohol or solvents to clean the appliance.
• Never spray insecticide liquids or similar
CLEANING THE FILTER
To keep your air conditioner working efficiently,
you should clean the evaporator filter every week
of operation.
The filter is housed in the intake grill. (Fig. 12)
Use a vacuum cleaner to remove dust accumulations
from the filter. If it is very dirty, immerse in warm water
and rinse a number of times. The water should be luke
warm. After washing, leave the filter to dry then re-insert the filter.
START - END OF SEASON OPERATIONS
START OF SEASON CHECKS
Make sure the power cable and plug are undamaged.
Follow the installation instructions precisely.
END OF SEASON OPERATIONS
To empty the internal circuit completely of water,
remove the cap (Fig. 13)
Run off all water left into basin. When all the water
has been drained, put the cap back in place.
Clean the filter and dry thoroughly before putting back.
button on the remote control. Wait for a few minutes
button
Figure 12
Figure 13
Page 19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bpact10 series

Table of Contents