Bosch SENSIXX DS38 Operating Instructions Manual page 14

4 Wait until the indicator light (8) stops
flashing and remains lit continuously.
Two beeps will be heard at the same
time.
5 Hold the iron over the sink or a container
to collect the water.
6 Press the steam release button (14) and
gently shake the iron. Boiling water and
steam will be released, carrying scale
and/or deposits that might be inside.
After approximately one minute, the
"Calc" automatic clean warning indicator
light (4) will go off.
14
B O SC H
Keep on shaking the iron gently for five
minutes while the steam release button
is pressed, so that water and steam
clean the chamber completely.
7 Without pressing the steam release
button (14), turn the programme selector
(9) and choose "Linen / max"
programme. The water in the steam
chamber will start evaporating.
8 Wait until all the water inside the
chamber has been evaporated. Then,
you can set the power button (10) to the
"O" position.
1'
* Model dependent