Frame By Frame Advance; Audio Switching; Rec Check - Panasonic AJ-D250P Operating Instructions Manual

Operation

Frame by frame advance

When the FF or REW button is pressed during still picture playback, the tape will be
advanced forward or backward one frame at a time.
O No sound will be heard during frame by frame advance.

Audio switching

The AUDIO OUT SELECT button is used to switch to the desired sound.
By pressing this button, the audio output is switched to the modes in the sequence shown below.
Mode
A
B
C
D
E
F
G
The settings in the boxes (
4-channel mode playback.
Sequence in which the modes are selected
[ [ . . A > > B > > C >
a a " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " } }

REC CHECK

By pressing the REC button during playback or in the STOP or STANDBY OFF mode, it is
possible to check the audio input signals, time code generator value and the video input signals
which have been selected using the INPUT SELECT switch.
O REC CHECK during playback
The REC CHECK mode is established while the REC button is held down. Normal playback
is restored when the button is released.
O REC CHECK in the STOP or STANDBY OFF mode
The REC CHECK mode is established when the REC button is pressed. To release the
mode, press the STOP button.
AUDIO OUT connectors
CH1 output CH2 output
CH1 CH2
CH1
CH2
CH3 CH4
CH3
CH4
CH1+CH3 CH2+CH4
) are valid only during DV format
> D > > E > > F > > G . . ] ]
Display tube LED
CH1 CH3
CH2 CH4
CH1 CH3
CH4
CH3
CH2 CH4
CH3
No display
CH4
CH3
No display
CH4
CH3
No display
CH4
CH1 CH3
CH2 CH4
15
• • • • • • • OFF
• • • • • • • ON