Cisco 1941W Configuration Manual page 201

Chapter Configuring Next-Generation High-Density PVDM3 Modules
DETAILED STEPS
Command or Action
Step 1 configure terminal
Example:
Router# configure terminal
Step 2
controller e1 slot/port
Example:
Router(config)# controller e1 0/0/0
Step 3 no shutdown
Example:
Router(config-controller)# no shutdown
Step 4 exit
Example:
Router(config-controller)# exit
Step 5 voice-port slot number/port
Example:
Router(config)# voice-port 0/0/0:1
Step 6
no shutdown
Example:
Router(config-voiceport)# no shutdown
Step 7
exit
Example:
Router(config-voiceport)# exit
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
Information About Configuring the PVDM3 Module on Cisco Voice Gateway Routers
Purpose
Enters global configuration mode.
Enters config-controller mode.
Restarts the controller port.
Exits config-controller mode.
Enters config-voiceport mode.
Restarts the voice port.
Exits config-voiceport mode.
193