Cisco 1941W Configuration Manual page 102

Restrictions and Guidelines for EtherChannel Feature
Configuring EtherChannel.
Perform these steps to configure the EtherChannel feature on Cisco 1900, 2900 and 3900 series ISRs.
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
DETAILED STEPS
Command
Step 1
configure terminal
Example:
Router# configure terminal
Step 2 interface port-channel number
Example:
Router(config)# interface port-channel 1
Step 3
ip address ip-address mask
Example:
Router(config-if)# ip address 10.0.0.1
255.255.255.0
Step 4 end
Example:
Router(config-if)# end
Step 5 interface range type number - number
Example:
Router(config)# interface range
gigabitEthernet 0/0-1
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
94
configure terminal
interface port-channel number
ip address ip-address mask
end
interface range type number - number
channel-group number
end
Chapter
Purpose
Enters global configuration mode.
Specify the EtherChannel (port channel) logical
interface, and enter interface configuration mode.
Assign an IP address and subnet mask to the
EtherChannel.
Returns to privileged EXEC mode.
Configures the interface range for the
EtherChannel.
Configuring EtherChannel